On our new Tips and Tech Help page we will be posting our best restoration tips and advice for our customers. If you have a particular problem you would like to see addressed here please post a suggestion.
On our new Tips and Tech Help page we will be posting our best restoration tips and advice for our customers. If you have a particular problem you would like to see addressed here please post a suggestion.
Dennis
December 27, 2021 at 1:37 pmWhat tool(s) are utilized for installing the rivets in the the rear cross member? Extremely difficult to find anything online or local.
admin • Post Author •
January 11, 2022 at 2:03 amWe use a pneumatic impact hammer after heating the rivet red hot. The easiest way if you do not have these tools is to clamp the rivet tight and weld it in place on the inside. Trying to set the rivet cold and by hand will not get you the results you are looking for.